RS232/485 Digital Signal to Analog Signal Converter ISODA Series
Product Category: Small Size A-D/D-A Converters with RS232/RS485 Port
Input: Digital Output: Analog signal
Isolation Voltage: 3000VDC Communication Port: RS232,RS485
Channel No: 1-2 Package: DIN Rail
Traffic Watch: times
Remarks: RS232/485 Digital Signal to Analog Signal Converter
Product Description
RS485/232 to 4-20ma/0-5V/0-10V/0-2.5V D-A Converter
Model Selection:
ISODA  O□-   □
Output voltage or current value         Communication Interface
O1:4-20mA                                    485: out is RS-485 interface 
O2:0-20mA                                    232: out is RS-232 interface
O4:0-5V                                      232/485:out is one RS232 or RS485 interface
O5:0-10V                                        (Key-press Choice)
O6:1-5V
O7:0-±5V
O8:user-defined
O9: 0-±20mA
O10: 0±10V
Note:When interface type is 232/485, default is RS485 output, user can switch between RS485 and RS232 by pushing down 2 buttons inside the chassis. When both buttons are pushed down, output is RS232,or is RS485 output.
Example:
1. ISODA O1-485   Means 4-20ma signal output,output is RS485 interface
2. ISODA O4-232   Means 0-5V signal output,output is RS232 interface.
3. ISODA O7-232/485 Means 0-±5V signal output,output is RS485 or RS232 interface
(Key-press Choice)
 
General Parameters                                                                     
(typical @ +25℃,Vs is 24VDC)
Outputs: Voltage / Current
Accuracy: 0.2%
Output Maladjustment: current output ±0.5 uA/℃,voltage output ±0.1mV/C
Temperature Drift: ±20 ppm/℃(±30 ppm/℃,max)
Output Resistance: current output  350Ω (4-20mA/0-20mA/0-±20mA output) 
               Voltage output 10mA (0-5V/0-10V/0-±5V output)   
Communications
Protocol       RS-485 or RS232 ASCII format,MODBUS
Baud Rates     Software Selectable (300、600、1200、2400、4800、9600、19200、38400bps)
Address       (0~255) Software Selectable
Response Time: 100 ms,max
Operation Power Supply: +8~50VDC
Power Loss: <1.5W
Operation Temperature: - 45 ~ +80℃         
Operation Humidity: 10 ~ 95% (non-condensing)
Storage Temperature: - 45 ~ +80℃              
Storage Humidity: 10 ~ 95% (non-condensing)                                    
Isolation Input/Output: 3KVDC,1 minute,leak current:1mA
                    Interface and power supply are common-ground.
Endure Impact Voltage: 3KVAC,1.2/50us(peak value)
Mechanical Dimensions: 83 mm  x  37 mm  x  51 mm
 
Related Data Sheets
Product Categories
Product Recommended
Copyright ©2002-2018 Sunyuan Corporation. All rights reserved. SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. Address: 2nd Floor, Building#6, Dongyi Industrial Park, Zhonghuan Road, Minzhi St. Longhua New District, Shenzhen, 518109, China. Tel: +86-755-83100080 83100110 Fax : +86-755-83116652 Email: sy@sun-yuan.com