Download > Isolation Amplifier > Sine wave, square wave etc Pulse frequency signal FV / FI isolated converter:DIN 2X2 ISO F-P-O
Sine wave, square wave etc Pulse frequency signal FV / FI isolated converter:DIN 2X2 ISO F-P-O
Product Categories: Isolation Amplifier File Type: File
Input: Frequency signal, 0-1KHz, 0-5KHz, 0-10KHz Output: 4-20mA,0-20mA,0-5V,0-10V,1-5V
Isolation Mode: Photo-electric Isolation Voltage: 3000VDC
Package: DIN35 Updated: 2018-10-11 15:36:37
Remarks: ine wave, square wave etc Pulse frequency signal FV / FI isolated converter
File Size: Downloads: 2 times
Download Add: Download Now
Description
SunYuan (DIN 1X1 / 2X2) ISO F-P-O frequency signal FV / FI isolating converter,it is an isolated transmitter isolation amplifier that converts sine wave, square wave, sawtooth wave and other pulse frequency signals into linear analog signals. The isolation transmitter has multiple sets of highly isolated DC/DC distributed power supplies and a high-speed frequency signal isolation and converter for isolated switching of any digital pulse signal. In the signal input and output circuit, the auxiliary power supply circuit is equipped with multiple protection devices such as TVS tube, PPTC self-recovery fuse, and bidirectional suppression diode. The product has been checked and corrected before leaving the factory, and the user can directly use it. SMD process structure and new technology isolation measures enable the device to achieve: power supply, signal input / output 3000VDC three isolation. And it can meet the requirements of industrial grade wide temperature, humidity, vibration and other harsh working environment.
 
         The DIN 35 rail is equipped with one-in-one, two-in and two-out digital pulse signal isolation converters. The internal is mainly composed of ISO series frequency signal to analog signal (FV/FI conversion) isolation transmitter IC. The ISO F-P-O integrated module is very convenient to use, and the customer can only calibrate the frequency signal by external zero point and full potentiometer calibration. The product can be made according to user-defined parameters. The installation method is standard SIP 16Pin PCB board soldering installation or DIN 35 rail mounting. It is especially suitable for speed monitoring of rotating equipment such as generators and motors, inverter (FA) frequency signal data acquisition and control, transformer working frequency detection, data measuring instruments and remote telemetry remote control equipment.
 
Features :
● Sine wave, sawtooth wave, square wave and other pulse frequency signals FV / FI analog conversion
● Standard DIN35 rail mounting, accuracy class: 0.1, 0.2
● The product has been checked and corrected before leaving the factory, and the user can use it directly.
● Extremely high linearity over the full range (non-linearity <0.2%)
● Multiple isolation between signal input/output/auxiliary power
● Auxiliary power supply: 5VDC, 12VDC, 24VDC single power supply
● 0-1KHz/0-5KHz/0-10KHz frequency signal isolation is converted into analog 0-5V/0-10V/0-10mA/0-20mA/4-20mA signal
● Industrial temperature range: - 25 ° C ~ + 70 ° C
 
Typical application :
● Sine wave, square wave, sawtooth signal isolation amplification and conversion
● Frequency sensor signal acquisition, isolation conversion
● Frequency converter (FA) frequency signal data acquisition and control
● Speed ​​monitoring of rotating equipment such as generators and motors
● Transformer working frequency detection
● Instrumentation and sensor signal transmission and reception
● Non-electrical signal transmission
 
Product selection example:
Example 1: DIN35 rail mounting
     Single input: 0-1KHZ auxiliary power supply: 24VDC output: 4-20mA Product model: DIN 1X1 ISO F1-P1-O1
 
Example 2: DIN35 rail mounting
     Single input: 0-10KHZ auxiliary power supply: 12VDC output: 0-5V Product model: DIN 1X1 ISO F3-P2-O4
 
Internal structure of DIN35 rail mounted products
The SunYuan pulse frequency signal FV/FI isolating converter uses the ISO F-P-O series of integrated modules. Adjustable resistors mounted on the PCB are used to adjust or correct the zero point and output accuracy. PCB board size: length * width 79.5 * 32.5 (mm).

Related Products
Products Recommended
Copyright ©2002-2018 Sunyuan Corporation. All rights reserved. SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. Address: 2nd Floor, Building#6, Dongyi Industrial Park, Zhonghuan Road, Minzhi St. Longhua New District, Shenzhen, 518109, China. Tel: +86-755-83100080 83100110 Fax : +86-755-83116652 Email: sy@sun-yuan.com